Instructions
1
Lay the Plexiglass on a flat surface and place a straightedge at the location where you want to cut it. Draw a line along the edge of the straightedge using a dry-erase marker.
2
Move the straightedge to the edge of the Plexiglass furthest away from you and line it up with the marker line.
3
Place the sharp blade of a utility knife or a scribing knife beside the straightedge so that it touches it. Press down with firm pressure and pull the blade toward you, using the straightedge as a guide. Continue pulling the blade until you reach the other edge of the Plexiglass nearest to you.
4
Move the straightedge back to the starting position and place the knife blade back beside it. Repeat the cutting method seven or eight more times using a single cut stroke each time.
5
Slide the Plexiglass over the edge of the table until the scored cut line hangs off by 1/4 to 1/2 inch.
6
Place one hand flat on top of the section still on the table and grasp the opposite edge with the other hand. Press down, firmly and quickly, on the free edge to snap it off from the remainder of the Plexiglass.
7
Sand down the cut edge of the Plexiglass with 200-grit sandpaper to remove any rough edges.
http://www.ehow.com/how_7177041_cut-plexiglass-hand.html
